Graphtec CE6000 How To Set Force And Perform Test Cut

Graphtec Offset Force. Graphtec CE7000160 TheMagicTouch EU Siser Sub Block Vinyl for Graphtec Cutters Cutter Settings Blade: 45° GRAPHTEC FC5100 -130, FC5100 -150, FC5100 -75, FC5100 -100.

Operation 1 Press the [COND/TEST] key in the default. graphtec ce6000-60, graphtec fc8600-60, graphtec fc8600-75 material *16" perma-twlll@

Gold Premium Deep Point Blade Vinyl Cutter Offset 0.25mm for Graphtec

Siser Sub Block Vinyl for Graphtec Cutters Cutter Settings Blade: 45° Ive followed the instructions, checked the blade depth with the loop, but wind up with force settings of 18 - 20 to cut Oracal 651. Supplement The force setting can be modified with the ± adjusted value

Graphtec CE600040 Sensor Offset Adj GraphTec Cutting Plotter. Force: 19 Accel: 4 Cutline Pattern: Off Assign Tool: 1 Tangent Emulation: Off Overcut Start: 0.7mm Overcut End: 0.7mm Distance Adjust: Off Intial Downforce: 2 TOOL SETTINGS Tool Offset Adju: X=0, Y=0 Step Pass: 0 Offset Force: 7 Offset Angle: 30 Data Sorting Area: Off Data Sorting Tool: Off Tool Up Speed: Auto Condition Priority: Program Tool. Page 97: Setting The Offset Angle Chapter 5 FUNCTION SETTINGS AND OPERATIONS 5.20 Setting the Offset Angle Your plotter rotates the blade tip according to the initial angle of rotation required by each line segment defined in the data sent from the.

Graphtec Teflon replacement cutting strips for FC9000 cutter.. The machine is pre-programmed with the correct setting for each blade type and will set itself accordingly. Operation 1 Press the [COND/TEST] key in the default.